Here it is for the ultimate in performance and affordability. Our deluxe fender/firewall mount adjustable boost activated water alcohol kit is one of our best sellers. Designed specifically for those who are on a budget. This is a good choice for low to medium boost set ups, intercooled or non-intercooled, who are looking for an affordable octane inhancement and substantial drop in air charge temperatures. This kit comes with everything you need including the tank. See exact system contents listed below.
System Contents Include:
- 150 psi Shurflo pump with EPDM seals for 100% methanol or alcohol
- Adjustable boost activated switch from 1-25 psi
- 2 quart methanol compatible contianer
- Check valve with quick disconnects
- Quick connect tank adapter fitting
- 15 ft of black high pressure fluid tubing
- 15 ft of black high pressure vacuum tubing
- 15 ft of electrical wire
- Nickel plated injector
- Two different size nozzles
- Relay with wiring harness
- Fuse holder with fuse
- 8 large zip ties
- 5 small zip ties
- Vacuum tee fitting
- 2 ft of high temperature wire loom
- Hardware for securing pump
Engineered specifically for both carbureted and EFI forced induction applications. Our Stage 1 boost activated fender/firewall mount kit is as affordable as it gets. Once installed and hooked up, operation is very simple. Simply begin by adjusting the adjustable boost activated switch mounted on the pump to your desired boost activation point ranging from 1-25 psi. During driving conditions, the system will remain on stand by untill the predetermined boost activation point is reached. Once activated the system will spray a flat continues amount of fluid through the nozzle or nozzles. The water alcohol injection system will remain on until boost drops back down below the set activation point. System then remains on stand by ready to be activated again.
Lower Air Temps By 50-250+ Degrees & Increase Power 10-15% With ONLY Windshield Wiper Fluid!
That's right! Using nothing more then windshield wiper fluid you can quickly achieve the benefits of a water/methanol injection system. Best of all, it's very easy to locate just about anywhere in the states and cost only $2.00-$3.00 per gallon. But not just any windshield wiper fluid will do. You'll need to buy the windshield wiper fluid that is rated for negative 20 degrees or greater below zero. It is only this windshield wiper fluid, which contains a 50% content or greater of methanol. Using strictly windshield wiper fluid you can expect to see a 50-250+ degree drop in air intake charge temperatures on supercharged and turbocharged engines with horsepower gains ranging from 10-15% are common. (temperature drops and horsepower gains vary depending on engine build, type supercharger or turbocharger used, amount of boost and intercooled or non-intercooled)
System Contents Include:
150 psi Shurflo pump with EPDM seals for 100% methanol or alcohol
Adjustable boost activated switch
2 quart alcohol compatible tank
Check valve with quick disconnects
10 ft of blue high pressure tubing
10 ft of electrical wire
Nickel plated injector
Fuse holder with fuse
1 year warranty
Benefits Of Water Alcohol/Methanol Injection:
Lower air temperatures by 50-250+ degrees
Reduces cylinder temperatures up to 300+ degrees
Increase your 87-93 pump gas by 8-20+ points
Increase horsepower safely by 10-15%
Allows you to safely run more boost and timing
Longer more stable combustion expansion and progression
Removes carbon build up from combustion chambers, pistons and valves
Reduces & helps eliminate engine damaging detonation & pre-ignition
No need for expensive racing fuel or additives
Features vs. Leading Competitors:
Compatible with 100% alcohol, methanol or ethanol
Nickel plated injector nozzle holder
Check valve with quick connect fittings for quick installation
Lightning fast response via boost signal
Important Notes:
Installation Time:
Availability:
Warranty:
AIS warrants this system free of defects for up to 1 year after purchase. See AIS policy & warranty page for complete details.
