Shopping Cart - 0 item(s)
Phone Us: 1-801-447-ALKY (2559)
Product search:
Home Page News Tech Forum Customers Contact Us
 
AIS Stage 1 Standard Fender/Firewall Mount Water Methanol Injection Kit [105004]
 $259.99 

AIS Stage 1 Standard Adjustable Boost Activated Fender/Firewall Mount Water Alcohol Injection System

Designed specifically for those who want to use their existing windshield wiper fluid container or already have their own tank this kit. This kit does not include a tank.

System Contents Include:

  • 150 psi Shurflo pump with EPDM seals for 100% methanol or alcohol
  • Adjustable boost activated switch from 1-25 psi
  • Check valve with quick disconnects
  • Universal quick connect tank adapter fitting
  • 15 ft of black high pressure fluid tubing
  • 15 ft of black high pressure vacuum tubing
  • 15 ft of electrical wire
  • Nickel plated injector
  • Two different size nozzles
  • Fuse holder with fuse
  • 8 large zip ties
  • 5 small zip ties
  • Vacuum tee fitting
  • 2 ft of high temperature wire loom
  • Hardware for securing pump

Engineered specifically for both carbureted and EFI forced induction applications. Our Stage 1 boost activated fender/firewall mount kit is as affordable as it gets. Once installed and hooked up, operation is very simple. Simply begin by adjusting the adjustable boost activated switch mounted on the pump to your desired boost activation point ranging from 1-25 psi. During driving conditions, the system will remain on stand by untill the predetermined boost activation point is reached. Once activated the system will spray a flat continues amount of fluid through the nozzle or nozzles. The water alcohol injection system will remain on until boost drops back down below the set activation point. System then remains on stand by ready to be activated again.

Lower Air Temps By 100-250+ Degrees & Increase Power 10-15% With ONLY Windshield Wiper Fluid!
That's right! Using nothing more then windshield wiper fluid you can quickly achieve the benefits of a water/methanol injection system. Best of all, it's very easy to locate just about anywhere in the states and cost only $2.00-$3.00 per gallon. But not just any windshield wiper fluid will do. You'll need to buy the windshield wiper fluid that is rated for negative 20 degrees or greater below zero. It is only this windshield wiper fluid, which contains a 50% content or greater of methanol. Using strictly windshield wiper fluid you can expect to see a 50-250+ degree drop in air intake charge temperatures on supercharged and turbocharged engines with horsepower gains ranging from 10-15% are common. (temperature drops and horsepower gains vary depending on engine build, type supercharger or turbocharger used, amount of boost and intercooled or non-intercooled)

110+ Plus Octane With ONLY Wind Shield Wiper Fluid!
Thats right! Using nothing more then windshield wiper fluid as listed above you can effectively increase your 91-93 octane pump gas by 10-20+ points dramatically increasing your fuels octane rating well over 100+ octane. No need for expensive racing fuels which can cost as much as $16.00 per gallon at some race tracks. Windshield wiper fluid cost's only $2.00-$3.00 per gallon. Even better our 1.5 gallon trunk mount container will last up to 2-3 weeks before needing to be refilled on a typical 500-600 horsepower supercharged or turbocharged motor costing you only pennies more per gallon to have 100+ octane.

Benefits Of Water Alcohol/Methanol Injection:

  • Lower air temperatures by 50-250+ degrees
  • Reduces cylinder temperatures up to 300+ degrees
  • Increase your 87-93 pump gas by 8-20+ points
  • Increase horsepower safely by 10-15%
  • Allows you to safely run more boost and timing
  • Longer more stable combustion expansion and progression
  • Removes carbon build up from combustion chambers, pistons and valves
  • Reduces & helps eliminate engine damaging detonation & pre-ignition
  • No need for expensive racing fuel or additives

Features vs. Leading Competitors:

  • Compatible with 100% alcohol, methanol or ethanol
  • Nickel plated injector nozzle holder
  • Check valve pre-installed for quicker installation
  • Lightning fast response via boost signal
  • Pre-wired - simply ground it and hook up power

Important Notes:

  • Requires only basic hand tools to install with the exception of a tap set to thread and install injector
  • Proper tuning is required to achieve maximum results

Installation Time:

  • Installation time approx. 2-3 hours

Availability:

  • This product normally ships within 1-2 business days when in stock. All customers will be notified of availability time shortly after orders are placed

Warranty:

AIS warrants this system free of defects for up to 1 years after purchase. See AIS policy & warranty page for complete details.

Add to Wishlist

Customers who bought this product also purchased

Shipping And Returns | Terms And Conditions Of Sale |  Privacy Policy |  Policy And Warranty |
About Us | Contact Us | Copyright © 2007 Alcohol Injection Systems


DISCLAIMER

Performance products, such as water methanol injection systems by AlcoholInjectionSystems.com, by their nature are designed to increase horsepower and performance not originally engineered into the vehicle by OEM manufactures and the increased stress could result in damage to the engine and related systems. Users are responsible to fully understand the horsepower capability and limitations of his/her vehicle’s engine and drive train according to manufacturer specifications.

This is a high performance product, use at your own risk. Click here to read full disclaimer.