Shopping Cart - 0 item(s)
Phone Us: 1-801-447-ALKY (2559)
Product search:
Home Page News Tech Forum Customers Contact Us
 
AIS Stage 2 Diesel Adjustable Progressive EGT Water Methanol Injection System [100503]
 $699.99 

AIS Stage 2 Adjustable Progressive EGT Trunk/Bed Mounted Water Alcohol Injection System

Here it is for the ultimate in control and tunabilty! Our Stage 2 progressive EGT system is the most advance water alcohol/methanol controller on the market hands down. While others claim to be the industry leader in water alcohol/methanol injection we bring it to you. Designed for the average diesel enthusists or the avid diesel drag racer it packs hardcore racing features such as:

  • 100% digital processor for lighting fast response
  • Special EGT converter box designed to work with your factory EGT sender
  • Uses booth a boost signal & EGT signal to vary flow
  • Quick, easy to use adjustment knobs
  • Built in data logger
  • Built in status monitor unlike the competitors
  • Built in serial port for connecting laptop
  • Free WIndows based software available
  • System includes a serial port for connecting to a laptop
  • Pre-wired ready to go unlike the competitors

Compare for yourself against the competitors systems and you'll quickly recognize the difference and why this is the most advance, most featured packed, easiest to use and install progressive water alcohol/methanol system on the market.

Engineered specifically for turbo diesel applications. Our Stage 2 Progressive EGT Diesel Kit is as simple as it gets. Once installed, operation is very simple. The Vari-Cool controller has a MIN, MAX and TUNE knob. The MIN knob is adjustable between 86 and 2000 degrees F, the Max has the same range. For example, if you set the min knob to 800 and the Max to 1400, the system would turn on at 800F and give you a variable flow to 1400 F at which time the system will be on full flow. The tune button is the MAX flow rate you want. For example, if you have the tune on 10 you will have full pressure at the nozzles at max EGT, 9 will give you 92%, 8 will be roughly 88%, etc. That is why the Vari-Cool Controller will allow you to tune the exact amount of flow you need. No other controller on the market can make that claim.

Once activated the system will spray a progressive amount of fluid through the nozzle or nozzles based on the custom map you have set. Flow will also reduce perportionally as boost & EGT's drop off and will not turn off untill boost or EGT's drops back down below the set activation point.

Industries First Trunk/Bed Mounted Water Alcohol/Methanol Injection System
You literally can't beat the performance, quality and value of this system. This is undoubtedly the easiest to install water methanol/alcohol injection system on the market. Our trunk/bed mount kits now come completely pre-assembled making it easier then ever before to install, hook up and run. No longer do you need to worry about installing the pump, container, hoses and wiring under the hood like our competitors systems. All that is required by you is to strap it down, put power to it, run the vacuum and high-pressure line, install the nozzle and begin tuning. It's that easy!

Compare To The Competitors Systems And See The Difference
Once you compare our trunk mount systems to the competitors under the hood systems you will quickly recognize the advantage and ease of installation with our systems. With installation times as quick as60-90 minutes our pre-assembled and pre-wired systems are 4-5 times faster then the competitors unassembled systems. No longer do you have to install the pump, reservoir, tubing and wiring under the hood for an unsightly appearance. Our trunk mount systems completely relocate everything into the trunk for a stealthy, clean installation. No one has to know you even have it!

No Space Under Your Hood...No Problem
It is becoming increasingly harder and harder to find space under the hood of today's cars. While many cars often do have the space to install a small container and pump under their hood this can be unsightly to some and take away from the car's appearance under the hood and let others know that you have it. Often time's space does not permit the use of an additional container under the hood. A common solution used by many is converting the vehicles existing windshield wiper fluid container for use with the water methanol/alcohol injection. This completely compromises the use of the windshield wiper feature. We feel this is hardly a solution and simply a short cut used by others. Our trunk/bed mount kit completely solves all of these issues by relocating everything cleanly in the trunk of your vehicle.

Lower Air Temps By 50-200+ Degrees & Increase Power 10-15% With ONLY Windshield Wiper Fluid!
That's right! Using nothing more then windshield wiper fluid you can quickly achieve the benefits of a water/methanol injection system. Best of all, it's very easy to locate just about anywhere in the states and cost only $2.00-$3.00 per gallon. But not just any windshield wiper fluid will do. You'll need to buy the windshield wiper fluid that is rated for negative 20 degrees or greater below zero. It is only this windshield wiper fluid, which contains a 50% content or greater of methanol. Using strictly windshield wiper fluid you can expect to see a 50-200+ degree drop in air intake charge temperatures on supercharged and turbocharged engines with horsepower gains ranging from 10-15% are common. (temperature drops and horsepower gains vary depending on engine build, type supercharger or turbocharger used, amount of boost and intercooled or non-intercooled)

110+ Plus Octane With ONLY Wind Shield Wiper Fluid!
Thats right! Using nothing more then windshield wiper fluid as listed above you can effectively increase your 91-93 octane pump gas by 10-20+ points dramatically increasing your fuels octane rating well over 100+ octane. No need for expensive racing fuels which can cost as much as $16.00 per gallon at some race tracks. Windshield wiper fluid cost's only $2.00-$3.00 per gallon. Even better our 1.5 gallon trunk mount container will last up to 2-3 weeks before needing to be refilled on a typical 500-600 horsepower supercharged or turbocharged motor costing you only pennies more per gallon to have 100+ octane.

Water Alcohol/Methanol Injection = Cheap Insurance For Your Motor
You wouldn't drive your car with out car insurance. Now theres insurance for your motor. Protect your motor and the investment you have in your motor with proven lower air intake charge temperturtes by 50-200+ degrees and increased octane by 10-20+ points. Together this will reduce and help eliminate engine damaging detonation. It's cheap insurance for your motor.

System Contents Include:

  • Completely adjustable digital progressive controller
  • Custom molded 1.5 gallon tank designed specifically for our pump
  • EGT Coverter box
  • 150 psi Shurflo pump with EPDM seals for 100% methanol or alcohol
  • Check valve with quick disconnects
  • 20 ft of blue high pressure tubing
  • 20 ft of vacuum tubing
  • 20 ft of electrical wire
  • 1 ft of black grounding wire
  • 2 rubber grommets
  • 2 Nickel plated threaded injector
  • 1 Quick connect tee fitting
  • Fuse holder with fuse
  • black anodized aluminum straps
  • All necessary hardware

Benefits Of Water Alcohol/Methanol Injection:

  • Lower air temperatures by 50-250+ degrees
  • Reduces cylinder temperatures up to 300+ degrees
  • Reduce EGT's by up to 250+ degree's
  • Increase your 87-93 pump gas by 8-20+ points
  • Increase horsepower safely by 10-15%
  • Allows you to safely run more boost and timing
  • Longer more stable combustion expansion and progression
  • Removes carbon build up from combustion chambers, pistons and valves
  • Reduces & helps eliminate engine damaging detonation & pre-ignition
  • No need for expensive racing fuel or additives

Features vs. Leading Competitors:

  • Most advanced progressive controller on the market - compare for yourself vs the competitors
  • Our all-in-on controller allows you to run not only a boost signal but also a MAF, TPS, MAP & EGT signal
  • System includeds a serial port for connection to a laptop
  • System comes pre-assembled unlike the competitors which requires you to assemble everything
  • System can be installed in 60-90 minutes - Thats 3-5 times faster vs. the competitors under hood kit
  • No unsightly pump, reservoir, hoses or added wiring under the hood
  • No need to convert existing wind shield wiper fluid container
  • Our system is completely hidden in the trunk for a stealthy install
  • 1.5 gallon container vs. the competitors common 1-2 quart container
  • Much less frequent refills required as the leading competitors do

Important Notes:

  • Requires only basic hand tools to install with the exception of a tap set to thread and install injector
  • Proper tuning is required to achieve maximum results

Installation Time:

  • Installation time approx. 60-90 minutes

Availability:

  • This product normally ships within 1-2 business days when in stock. All customers will be notified of availability time shortly after orders are placed

Warranty:

AIS warrants this system free of defects for up to 1 year after purchase. See AIS policy & warranty page for complete details.

Add to Wishlist
Shipping And Returns | Terms And Conditions Of Sale |  Privacy Policy |  Policy And Warranty |
About Us | Contact Us | Copyright © 2007 Alcohol Injection Systems


DISCLAIMER

Performance products, such as water methanol injection systems by AlcoholInjectionSystems.com, by their nature are designed to increase horsepower and performance not originally engineered into the vehicle by OEM manufactures and the increased stress could result in damage to the engine and related systems. Users are responsible to fully understand the horsepower capability and limitations of his/her vehicle’s engine and drive train according to manufacturer specifications.

This is a high performance product, use at your own risk. Click here to read full disclaimer.