Here it is for the ultimate in performance, control and tune ability! Our Stage 2 progressive fender/firewall mount system comes with the most advance water alcohol/methanol controller on the market hands down. Designed specifically for those who want the best performance with a fender/firewall mounted system. This is a excellent choice for low to high boost applications, intercooled or non-intercooled, who are looking for the biggest increases in octane enhancement, reduction in air charge temperatures and detonation suppression through out their rpm range.
Engineered specifically for both carbureted and EFI forced induction applications. Our Stage 2 progressive fender/firewall mount water/alcohol injection system is as simple as it gets. Once installed, operation is very simple. Simply begin by running a boost signal from manifold pressure to the boost port (brass nibble) located on the side of the programmer. From there you can quickly set the activation point, from 1-30psi, using the green knob. Next, the middle gray knob (Tune) with 10 positions allows you to control the maximum duty cycle of the pump. This is great for fine tuning in situations where you need to lower or raise the flow. Lastly, you have the red knob which allows you to control the rate of increase. For example, setting it a 15psi would allow the system to go into full flow once 15psi was reached. You can also bring the system in quicker by setting the red knob sooner. For example, setting the red knob at 10 psi even though the motor actually reaches 15 psi. This will increase rate of increase and vise versa.
Once activated the system will spray a progressive amount of fluid through the nozzle or nozzles based on the custom map you have set. Flow will also reduce proportionally as boost drops off and will not turn off until boost drops back down below the set activation point. Users can also turn the system into a two dimensional system by including any of the following 0-5v inputs; TPS, MAF, MAP, EGT and AIT, for even greater control and custom mapping which isn't offered by the competitors systems.
While others claim to be the industry leader in water alcohol/methanol injection we bring it to you. Compare for yourself against the competitors systems and you'll quickly recognize the difference and why this is the most advance, most featured packed, easiest to use progressive water alcohol/methanol system on the market. Designed for the average street enthusiast or the avid racer it packs hardcore racing features such as:
AIS Features vs. Leading Competitors:
100% digital processor for lighting fast response
Quick, easy to use knobs for adjusting activation settings, maximum duty cycle, and rate of increase - no screw driver required like the competitors programmer
Industries only true 2-dimensional programmer allowing you to run a boost signal in conjunction with any of the following 0-5v input signals; TPS, MAF, MAP, EGT and AIT
Industries only water alcohol/methanol injection controller on the market with a built in data logger
Built in status monitor unlike the competitors
Built in serial port for connecting laptop
Free Windows based software available
Pre-wired ready to go unlike the competitors
Lower Air Temps By 50-200+ Degrees & Increase Power 10-15% With ONLY Windshield Wiper Fluid!
That's right! Using nothing more then windshield wiper fluid you can quickly achieve the benefits of a water/methanol injection system. Best of all, it's very easy to locate just about anywhere in the states and cost only $2.00-$3.00 per gallon. But not just any windshield wiper fluid will do. You'll need to buy the windshield wiper fluid that is rated for negative 20 degrees or greater below zero. It is only this windshield wiper fluid, which contains a 50% content or greater of methanol. Using strictly windshield wiper fluid you can expect to see a 50-200+ degree drop in air intake charge temperatures on supercharged and turbocharged engines with horsepower gains ranging from 10-15% are common. (temperature drops and horsepower gains vary depending on engine build, type supercharger or turbocharger used, amount of boost and intercooled or non-intercooled)
110+ Plus Octane With ONLY Wind Shield Wiper Fluid!
Thats right! Using nothing more then windshield wiper fluid as listed above you can effectively increase your 91-93 octane pump gas by 10-20+ points dramatically increasing your fuels octane rating well over 100+ octane. No need for expensive racing fuels which can cost as much as $16.00 per gallon at some race tracks. Windshield wiper fluid cost's only $2.00-$3.00 per gallon. Even better our 1.5 gallon trunk mount container will last up to 2-3 weeks before needing to be refilled on a typical 500-600 horsepower supercharged or turbocharged motor costing you only pennies more per gallon to have 100+ octane.
Water Alcohol/Methanol Injection = Cheap Insurance For Your Motor
You wouldn't drive your car with out car insurance. Now theres insurance for your motor. Protect your motor and the investment you have in your motor with proven lower air intake charge temperatures by 50-200+ degrees and increased octane by 10-20+ points. Together this will reduce and help eliminate engine damaging detonation. It's cheap insurance for your motor.
System Contents Include:
Completely adjustable digital progressive controller
2 quart 100% alcohol compatible tank
150 psi Shurflo pump with EPDM seals for 100% methanol or alcohol
Heavy duty check valve with quick disconnects
10 ft of black high pressure tubing
10 ft of electrical wire
Nickel plated threaded injector
Nozzle sized to application
Fuse holder with fuse
10 ea. 8" zip ties
5 ea. 4" zip ties
All necessary hardware
