After taking a look at the long list of modifications. It's clearly evident Chris Carlson is no stranger to high performance modifications as shown here with his custom 2007 Cobalt SS. Having carefully chosen each aftermarket performance part added, we are honored to have been selected to handle his water methanol injection needs. Furthermore, having performed all the work himself, Chris more then knows his way around a shop and turning wenches.

• 42lb injectors
ZZP 2.8 pulley, 18 psi
NGK iridium plugs
GM dual pass intercooler end plate
ZZP PCM with GM Stage 3
• AEM Uego air/fuel monitor
• 2 Stage nitrous oxide (50,25 shot)
Cold air intake with AEM filter
AIS Stage 1 trunk mount water methanol injection
• Scanforce OBDII series gauge
• ZZP header
• ZZP 3 inch down pipe with high flow cat
• Custom cut & weld true 3" TI cat back
• Whisper resonator
• Magnaflow muffler
• Polyurethane engine mounts
• Lowering springs
• Cross drilled & slotted rotors
• Dyno without NOS 240 WHP at 6758 rpm, 218 WTQ at 4088 rpm at 2500FT ALT AND 85 DEG