All New 300 PSI Recirculating Style Water Methanol Injection Pump. More Pressure...Smoother Flow.
This is our new and improved, 100% methanol compatible, 300 psi pump which comes standard with all of our systems. This pump is available separately for those who need just the pump or are looking to upgrade.
Pressure adjustable from 100- 300 psi (comes preset at 220 psi)
Compatible for use with 100% methanol
No pressure cut off switch eliminating any pulsation
Internally bypasses for a smooth constant even flow at the nozzle
Built-in finned heat sink on end of pump
Self priming up to 8 vertical feet
Large 3/8th NPT female threaded ports (fittings shown in picture not included)
Integrated built in anti-reverse check valve
12 volt pulls 13.5 amp current draw - 20-25% more flow then 10-11 amp pumps
Higher rpm motor then used by competitors
Can be used with 16 volt electrical systems - increase's max output by 11%
Can run dry up to an hour without damage
Interchangeable with Shurflo pumps - same bolt pattern
1 year warranty when purchased by it's self
Our pumps come with large 3/8 npt female threaded ports unlike the competitors pump which use's 1/4" push connect fittings which are built into the pump and can not be removed. Their are many advantages to having threaded ports vs built-in non removable push connect fittings. Advantages are as listed. Biggest reason to not to use fixed fittings is if the fitting is to ever leak you do not need to replace the whole pump. Simply replace the fitting. Our pump allows the use of larger hose on the inlet allowing for greater flow. It also allows the use of different style fittings so users can use stainless for example in addition to straight, 45 or 90 degree fittings.
Pump fittings shown in the picture are not included and can be purchased separately if needed
While this pump is compatible for use with 100% alcohol or methanol. Alcohol Injection Systems, AIS, recommends a maximum mixture of 50/50 Water and methanol. Running mixtures stronger then 50/50 are flammable and AIS will not held liable for any engine fire that results from misuse or malfunction.
Pump comes pre-set at 220 PSI
Have questions about this product or other water injection products we carry. Give us a call directly at 1.801.447.2559.