| Can I Spray Water Methanol Injection Through My Eaton Supercharger by Editor |
 |
Every week and almost daily were asked this or similar questions by customers. It's a reasonable and understandable concern for those who are running an Eaton supercharger or any of the other positive displacement superchargers such as Kenne Bell, Magnacharger, Whipple, Edelbrock etc. as the water m... Published: Friday 18 November, 2011 |
 |
|
| Does It Matter Which Why I Mount The Water Injection Pump by Editor |
 |
We are often asked by customers "Does it matter which way I mount the water injection pump?" The answer is no. It makes no difference if the pump is mounted upside down, sideways, flat etc. You can mount the pump however you want and it will perform the same. What is important is... Published: Thursday 17 November, 2011 |
|
|
| Are Bungs Needed To Mount Water Methanol Injection Nozzles by Editor |
|
A common misconception and question often asked. Are welded bungs required when mounting water methanol injection nozzles into steel or aluminum piping? The answer is no. Read along to find out why and the biggest mistake people make when they do use bungs. Published: Thursday 17 November, 2011 |
|
|
|
| Mounting Nozzles In Silicone Do's & Dont's by Editor |
 |
Many times when doing an install customers are unable to mount their water methanol injection nozzles in metal piping. Leaving them to install the nozzle in a rubber silicone hose. When mounting your water methanol injection into a rubber hose Published: Thursday 11 March, 2010 |
|
|
